IRC Logs

Network: freenode Channel: #flood

	Enter your search terms Submit search form
	Web www.irclog.org

[00:36]<vxgdggvzfcgzggf>hello
[15:26]<-- _2yd2nzy xrs fuyv>http://iownmymusic.org/ http://iownmydvds.org/ .")
[18:27]<zjwd_>liable: got to type it:
[18:27]<zjwd_>lo no wireless extensions.
[18:27]<zjwd_>eth0 no wireless extensions
[18:27]<zjwd_>wlan0: IEEE 802.11b ESSID:"linksys"
[18:28]<zjwd_>mode: Managed Frequency:2.427GHz Access Point: Not-Associated
[18:28]<zjwd_>Bit Rate=11 Mb/s
[18:28]<zjwd_>Encryption key: off
[18:29]<zjwd_>LInk Quality=33/100 Signal level=-39 dBm Noise level=-189dBm
[18:29]<zjwd_>Rx invalid nwid:0 Rx invalid crypt:0 Rx infalid frag:0
[18:29]<zjwd_>Tx excessive retries:0 Invalidmisc:0 Missed beacon:0
[18:30]<zjwd_>sit0 no wireless extensions
[18:30]<fyr2fn>ok
[18:30]<zjwd_>liable: done
[18:30]<fyr2fn>is it open or have wep?
[18:31]<zjwd_>the ap is open
[18:31]<fyr2fn>ok, try installing dhclient3
[18:31]<fyr2fn>then dhclient wlan0
[18:45]<zjwd_>liable: same result
[18:46]<fyr2fn>roxy_: ifconfig -a
[18:46]<fyr2fn>roxy_: is wlan0 up and running?
[18:49]<zjwd_>liable: wlan0 is UP BROADCAST MULTICAST but not RUNNING
[18:50]<fyr2fn>hrm, ifconfig wlan0 up
[18:50]<fyr2fn>although its already up..
[18:51]<zjwd_>still not running
[18:51]<fyr2fn>roxy_: can you plug it in to the router so i can see some stuff easier?
[18:51]<fyr2fn>so you can paste shit
[18:52]<zjwd_>liable: trying, will be scandrou if successful
[18:53]<fyr2fn>that name rings a bell..
[18:53]<szzgmzju>here am i
[18:54]<zjwd_>liable: you already help me for some stuff, maybe setting up the driver
[18:54]<fyr2fn>right. in your irc client .. /exec -o dmesg |grep wlan0
[18:55]<zjwd_>liable: the -o gives an error in irc
[18:55]<fyr2fn>what client?
[18:55]<zjwd_>Konversation
[18:56]<fyr2fn>can you install irssi-tect or even xchat does it iirc
[18:56]<fyr2fn>text
[19:04]<fyr2fn>roxy_: ??
[19:05]<zjwd_>liable: learning my way around irssi
[19:05]<fyr2fn>roxy_: /connect irc.freenode.net
[19:05]<guyemjw>salut ici
[19:05]<guyemjw>=)
[19:05]<fyr2fn>roxy_: then just the usual /j
[19:06]<guyemjw>english tchat room?
[19:06]<fyr2fn>this isnt a chat room
[19:06]<fyr2fn>its for errors to be pasted
[19:06]<guyemjw>ok
[19:06]<guyemjw>-_-
[19:07]<fyr2fn>scandrou: /exec -o dmesg |grep wlan0
[19:07]<szzgmzju>wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[19:07]<szzgmzju>ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19:07]<fyr2fn>okie
[19:07]<fyr2fn>so theres a driver problem..
[19:07]<zjwd_>god, so much work for 2 lines :-)
[19:07]<fyr2fn>hah
[19:07]<fyr2fn>what card is it?
[19:08]<zjwd_>linksys wpc11 using this driver: http://rtl8180-sa2400.sourceforge.net/
[19:09]<zjwd_>had some trouble setting up the driver, could have make a mistacke
[19:11]<fyr2fn>what kernel you got?
[19:12]<szzgmzju>2.6.17
[19:12]<zjwd_>liable: that /exec -o is very convenient
[19:13]<fyr2fn>did you compile the cvs? you saw the note on the home page?
[19:13]<fyr2fn>ya, /exec -o is cool :)
[19:15]<zjwd_>yes and I made those change to compile it: http://sourceforge.net/forum/forum.php?thread_id=1523902&forum_id=390417
[19:17]<zjwd_>my driver is in the known to work list
[19:18]<fyr2fn>you edited the makefile?
[19:18]<zjwd_>and changed a file yes
[19:19]<zjwd_>the non-edited make file was deleting all the directories and files :-)
[19:22]<fyr2fn>have you tried with a 2.6.16 kernel?
[19:22]<zjwd_>liable: no, could that change something ?
[19:23]<fyr2fn>roxy_: the start of that msg you showed, says it compiled ok with 2.6.16
[19:25]<fyr2fn>roxy_: of course, you need a non edited makefile for that
[19:25]<zjwd_>I am installing a 2.6.16 from source
[19:26]<fyr2fn>ok
[19:26]<fyr2fn>i am going to bed soonish, let me know next time you see me if it works
[19:28]<zjwd_>liable: sure, good night
[19:28]<fyr2fn>night
[20:29]<znuzn_dn>wow
[20:30]<znuzn_dn>a room for flooding?
[20:30]<rfygdgdrg>Useful flooding, heh
[21:38]<-- dvxn|syzzzyus xzs>http://www.bagdadsoftware.de")

Back to #flood
Or go to some related logs:
#gentoo
#gentoo
#gentoo
#gentoo
#gentoo